Setting up seismic installations

These articles cover setting up data flow from a seismic installation using Güralp Systems' hardware once it has been installed.

Information on configuring individual units is also available in the supplied manuals.

Setting up triggering for a dialup installation

How to configure a Güralp digital sensor or CMG-DM24 so that you can dial in through an attached modem, select and download triggered events.

Configuring digitizers and digital sensors for dialup access

How to set up a digital installation and modem link for manual or automated data transfer, configuration and firmware updates.

Setting up GPS equipment

Installing and using GPS receivers with Güralp Systems hardware.

Setting up external triggering

How to make a DM24mk3 digitizer trigger your own devices when it detects an event.

Networking with Scream!

How to configure Scream! to receive and transmit GCF data over a local network or the Internet.

Filing modes for digital instruments

How to set up a CMG-DM24 or Güralp Systems digital sensor to record and transmit data in different ways.

Configuring DCMs for dialup access

How to configure a CMG-DCM to accept incoming calls through an attached modem.

What next?

Once the equipment is configured, your system is ready for use. Additional information on common maintenance tasks, calibration, and troubleshooting is available in our support section.

Güralp Systems also offer a range of services including station operation, maintenance, and training courses.



Home Products New installations Installing seismic equipment Setting up seismic installations Boreholes OBS Services Case studies Customer support About us	Setting up seismic installations These articles cover setting up data flow from a seismic installation using Güralp Systems' hardware once it has been installed. Information on configuring individual units is also available in the supplied manuals. Setting up triggering for a dialup installation How to configure a Güralp digital sensor or CMG-DM24 so that you can dial in through an attached modem, select and download triggered events. Configuring digitizers and digital sensors for dialup access How to set up a digital installation and modem link for manual or automated data transfer, configuration and firmware updates. Setting up GPS equipment Installing and using GPS receivers with Güralp Systems hardware. Setting up external triggering How to make a DM24mk3 digitizer trigger your own devices when it detects an event. Networking with Scream! How to configure Scream! to receive and transmit GCF data over a local network or the Internet. Filing modes for digital instruments How to set up a CMG-DM24 or Güralp Systems digital sensor to record and transmit data in different ways. Configuring DCMs for dialup access How to configure a CMG-DCM to accept incoming calls through an attached modem. What next? Once the equipment is configured, your system is ready for use. Additional information on common maintenance tasks, calibration, and troubleshooting is available in our support section. Güralp Systems also offer a range of services including station operation, maintenance, and training courses.