Scream is a Windows and Linux application for Seismometer Configuration, REal time Acquisition and Monitoring.
With Scream, you can monitor, configure and record data from an entire seismic network, including both local and remote sites.
To obtain a free copy of Scream complete the form at the bottom of the page and you will be sent a download link.
- Windows (9x/NT/2000/XP,Vista,7) and Linux (.rpm or .tgz) versions
- Receive data over serial or dialup links, TCP/IP, UDP/IP or other file transfer protocols, or any combination of these
- Low-overhead GCF format for data transfer
- Real-time conversion to miniSEED, GSE 2.0, SAC, P-SEGy, SUDS, PEPP or UFF format
- Display any number of incoming streams with real-time spectrogram calculation
- User-friendly interface to Guralp instruments including full mass control, calibration, digitizer output configuration and triggering
- Extension modules for calibration, noise calculations and data analysis
- Diagnostic tools including data integrity checks, at-a-glance GPS and mass position status, and direct access to the digitizer console
- Advanced networking facilities
Scream includes extensive support for TCP/IP and UDP/IP networks. It is designed to be effectively network-transparent, so users can contact and configure digitizers at remote sites as easily as those directly connected to the computer.
A network summary window monitors the status of data streams, mass positions, and GPS timing for every instrument. Scream! can also send e-mails automatically to alert station operators when problems occur.
The Scream! network protocol is supported by Earthworm’s scream2ew and Antelope’s guralp2orb extension modules. Both modules are part of the standard distribution.