Chapter 4. Connector pin-outs
4.1 GPS Output, Power Input (right-hand connector)
This is a standard 10-pin, military-specification, bayonet plug, conforming to MIL-DTL-26482 (formerly MIL-C-26482). A typical part-number is 02E-12-10P although the initial “02E” varies with manufacturer. Suitable mating connectors have part-numbers like ***-12-10S and are available from Amphenol, ITT Cannon and other manufacturers. |
|
Pin | Function |
A | Power 0 V input |
B | Power +5 V to +36 V DC input |
C | 1pps signal output to digitiser |
D | not connected |
E | Console RS232 TxD (for factory use only) |
F | Console RS232 RxD (for factory use only) |
G | Ground (for factory use only) |
H | not connected |
J | not connected |
K | NMEA RS232 transmit to digitiser |
| Wiring details for the compatible socket, ***-12-10S, as seen from the cable end. |
4.2 GPS Input (left-hand connector)
This is a standard 10-pin, military-specification, bayonet plug, conforming to MIL-DTL-26482 (formerly MIL-C-26482). A typical part-number is 02E-12-10P although the initial “02E” varies with manufacturer. Suitable mating connectors have part-numbers like ***-12-10S and are available from Amphenol, ITT Cannon and other manufacturers. |
|
Pin | Function |
A | Power 0 V output |
B | Power +V output |
C | 1pps signal input |
D | not connected |
E | not connected |
F | not connected |
G | Ground |
H | not connected |
J | not connected |
K | NMEA RS232 receive from GPS |
| Wiring details for the compatible socket, ***-12-10S, as seen from the cable end. |