MAN-ELP-0110 - Pre-amplifier for GS13- Operator's Manual
Chapter 5. Specifications
Material | Die-cast Aluminium casing |
Dimensions | 160 mm × 100 mm × 60 mm |
Input voltage | 10 V to 36 V DC |
Input current | 80 mA (at 12 V) |
Gain | × 40 (nominal – see innav id="foot"> |
Equivalent input noise (with 1 k source resistance) | 6 nV/√Hz @ 1 Hz (±1) 3.5 nV/√Hz @ 10 Hz (±0.5) |
Frequency response | Flat from DC to 1 kHz (to within 3 dB) |
Output | Differential, voltage |
Output impedance | 47 Ω |
Output saturation level | > 20 V peak-to-peak |
Calibration amplifier gain | × 8.692 (nominal – see individual instrument's calibration document) |
Calibration resistor | 200 Ω |
Calibration signal | 25 mA (into 33 Ω coil) |