Chapter 9. Appendix 3: Instrument/channel names
The tables in this section show the names and codes of the streamed channels along with the record names and channel codes for recorded data.
The first character ‘x’ in miniSEED channel code represents the sample rate. The possible values are:
F ≥ 1000 Hz to < 5000 Hz
C ≥ 250 Hz to < 1000 Hz
H ≥ 80 Hz to < 250 Hz
B ≥ 10 Hz to < 80 Hz
M > 1 to < 10
L ≈ 1
9.1 Instrument 0 – Minimus
Sensor | Comp. | Data streaming | Data recording | |||
Digital filter mode | Live stream name | Live Stream code | Data record name | MiniSEED channel code | ||
Voltage | Acausal | Sensor0VoltageRough | 0VINI0 | sd_consumer(Sensor0VoltageRough) | xYV | |
Humidity | Acausal | Sensor0HumidBRough | 0HUMB0 | sd_consumer(Sensor0HumidBRough) | xIO | |
First derivative of temperature | Acausal | Sensor0TemprDRough | 0TMPD0 | |||
Temperature | Acausal | Sensor0TemprCRough | 0TMPC0 | sd_consumer(Sensor0TemprCRough) | xKO | |
Internal Clock | PLL control voltage | Acausal | CLX_DAC | CLKDAC | ||
Clock PPB error | Acausal | CLK_PPB | CLKPPB | |||
Clock period offset to GNSS time | Acausal | CLK_PRD | CLKPRD | |||
Clock phase offset to GNSS time | Acausal | CLK_PHA | CLKPHA | sd_consumer(ClkPhaseOffsetRough) | xEP | |
9.2 Instrument 1 – Maris digital sensor
Sensor | Comp. | Data streaming | Data recording | |||
Digital filter mode | Live stream name | Live Stream code | Data record name | MiniSEED channel code | ||
Seismometer (velocity response) | Vertical | Acausal | Sensor1SeismoZSmooth | 1VELZ0 | sd_consumer0(Sensor1SeismoZSmooth) | xHZ |
Sensor1SeismoZSmooth | 1VELZ2 | sd_consumer1(Sensor1SeismoZSmooth) | xHZ | |||
Causal | Sensor1SeismoZLowLat | 1VELZC | ||||
North | Acausal | Sensor1SeismoNSmooth | 1VELN0 | sd_consumer0(Sensor1SeismoNSmooth) | xHN | |
Sensor1SeismoNSmooth | 1VELN2 | sd_consumer1(Sensor1SeismoNSmooth) | xHN | |||
Causal | Sensor1SeismoNLowLat | 1VELNC | ||||
East | Acausal | Sensor1SeismoESmooth | 1VELE0 | sd_consumer0(Sensor1SeismoESmooth) | xHE | |
Sensor1SeismoESmooth | 1VELE2 | sd_consumer1(Sensor1SeismoESmooth) | xHE | |||
Causal | Sensor1SeismoELowLat | 1VELEC | ||||
Digital seismic sensor mass position | Vertical | Acausal | Sensor1IntZRough | 1INTZ0 | sd_consumer(Sensor1IntZRough) | xYZ |
North | Acausal | Sensor1IntNRough | 1INTN0 | sd_consumer(Sensor1IntNRough) | xYN | |
East | Acausal | Sensor1IntERough | 1INTE0 | sd_consumer(Sensor1IntERough) | xYE | |
MEMS accelerometer | Vertical | Acausal | Sensor1AccelZRough | 1AXLZ0 | sd_consumer0(Sensor1AccelZRough) | xNZ |
sd_consumer1(Sensor1AccelZRough) | xNZ | |||||
North | Acausal | Sensor1AccelNRough | 1AXLN0 | sd_consumer0(Sensor1AccelNRough) | xNN | |
sd_consumer1(Sensor1AccelNRough) | xNN | |||||
East | Acausal | Sensor1AccelERough | 1AXLE0 | sd_consumer0(Sensor1AccelERough) | xNE | |
sd_consumer1(Sensor1AccelERough) | xNE | |||||
Magnetometer | Z | Acausal | Sensor1MagnetZRough | 1MAGZ0 | sd_consumer(Sensor1MagnetZRough) | xFZ |
Y | Acausal | Sensor1MagnetNRough | 1MAGN0 | sd_consumer(Sensor1MagnetNRough) | xFN | |
X | Acausal | Sensor1MagnetERough | 1MAGE0 | sd_consumer(Sensor1MagnetERough) | xFE | |
Yaw | Acausal | Sensor1RotYawRough | 1ROTY0 | sd_consumer(Sensor1RotYawRough) | xYY | |
Pitch | Acausal | Sensor1RotPtchRough | 1ROTP0 | sd_consumer(Sensor1RotPtchRough) | xYP | |
Roll | Acausal | Sensor1RotRollRough | 1ROTR0 | sd_consumer(Sensor1RotRollRough) | xYR | |
Temperature | Acausal | Sensor1TemprARough | 1TMPA0 | sd_consumer(Sensor1TemprARough) | xKO | |