Firmware for Digital Instruments, Digitisers and Acquisition Systems
|
|
The Minimus₂ and Minimus Lite both run DIG2 firmware.
|
|
|
The Minimus and Minimus+ both run DIG firmware.
|
|
|
The Fortimus digital accelerometer contains a Minimus digitiser which runs DIG firmware.
|
|
|
The Certimus digital seismometer contains a Minimus digitiser which runs DIG firmware.
|
|
|
The Affinity vault-quality digitiser runs Platinum firmware.
|
|
|
The NAM Mk2 data acquisition system runs Platinum firmware.
|
|
|
The NAM Mk1 data acquisition system runs Platinum firmware.
|
|
|
The DM24S3 and DM24S6 digitisers both run DM24 firmware.
|
|
or 
|
These systems each contain two internal modules: a DM24 and an EAM. The EAM runs Platinum firmware:
Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
|
|
|
This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:
Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
|
|
|
This instrument contains two internal digital modules: a digitiser and an EAM acquisition module. The EAM runs Platinum firmware:
The digitiser may be a CD24 or a DM24 but, in either case, you should always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal digitiser module:
|
|
|
This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:
Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
|
|
|
This instrument contains two internal digital modules: a DM24 digitiser and an EAM acquisition module. The EAM runs Platinum firmware:
Always upgrade the EAM's firmware first. The EAM should then be used to upgrade the firmware of the internal DM24 module:
|
|
|
The EAM data acquisition system runs Platinum firmware.
|
|
|
The DCM data acquisition system runs Platinum firmware.
|
|
|
The 3ESPCD was offered with choice of two digitisers: a DM24 or
a CD24. Models with a CD24 have a 19-pin connector on the lid for
a break-out box
(
|
|
|
The 3ESPCD was offered with choice of two digitisers: a DM24 or a CD24. Models with a DM24 have DATA and GPS connectors on the lid of the instrument itself. The digitisers in the DM24 variant run DM24 firmware:
|
|
|
The 6TD has an internal CD24 digitiser, which runs CD24 firmware:
|
|
|
The CD24 digitiser runs CD24 firmware:
|
).
The DATA and GPS connectors are on the break-out box, not on the
instrument. The digitisers in the CD24 variant run