Chapter 11. Revision history

16/12/21

U

Changed description of SET-ID to require adding a trailing comma to work-around RT28026.

1/05/19

T

Separated timing-related commands from general configuration commands and added a discussion of GPS issues.

Added getWNROpivot, setWNROpivot and GPS-TYPE 4 commands.

Changed transmission mode graphics and added a summary.

Replaced most of "GCF Format" chapter with reference to the on-line protocol specification.

13/03/17

S

Added AUTOCAL and related commands.

22/09/16

R

Rebranded. Added new-style warnings, cautions and notes. Many minor alterations, clarifications and corrections. Updated many Scream! Screen-shots. Improved description of serial downloads. Amended COMPRESSION.

15/01/14

P

Amended STOPBITS, added RESETLABELS

18/11/09

O

Corrected USB information.

05/10/09

N

Corrected significant typographical error in format command for USB storage device

14/09/09

M

Replaced ReadSCSI instructions with those for GCFXtract. Enhanced connector pin-out documentation.

07/09/09

L

Added reference to EAMs and data-terminal command

14/05/09

K

Added SERIAL2 and amended SET-ID

20/02/09

J

Improved style, corrected stream IDs, new graphics, etc

27/01/09

I

Minor Update

26/11/08

H

USB port use information added

23/11/06

G

Revised and reorganized

04/09/06

F

Firmware v103b12 (SETDSS)

19/05/06

E

Firmware v102b73 and DSP v1055 (LOWLATENCY)

21/04/06

D

Firmware v102b68

07/02/06

C

Firmware v102b58 (GCFIP, EVENTSLIST, etc.)

23/12/05

B

New functionality and corrected pinouts

16/08/05

A

New document