CERTIMUS
CERTIMUS
NEXT GENERATION SEISMIC STATION
GüVü Bluetooth App
Displays instrument State-of-Health (SOH), waveforms, orientation, temperature and humidity data.
120 s - 100 Hz
With an adjustable high frequency corner and selectable gain options of 1000 or 2000 V/ms- ¹.
Ultra-low-power mode < 300 mW
Ideal for remote sites powered by battery or solar.
± 90° tilt range
No other seismometer is easier to install.
Wi-Fi and PoE
For plug-and-play deployment.
Multi-touch sensitive LCD screen
Optional 2.4 inch, full colour LCD display showing waveforms, instrument State-of-Health (SOH), gain settings, network configurations and a virtual instrument level.
For added confidence
Our GüVü Bluetooth App, displays waveforms, orientation, temperature and humidity data, plus you can alter sample rates without disturbing the instrument.
Features
Easy installations
With an operational tilt range of ± 90°, the hole required for direct burial just got a lot smaller.
And, if you need to be up and running in the shortest timeframe, the 1 and 10 second modes adjust the high-frequency corners pre- or post-deployment to significantly reduce the settling time of the sensor.
And, if you need to be up and running in the shortest timeframe, the 1 and 10 second modes adjust the high-frequency corners pre- or post-deployment to significantly reduce the settling time of the sensor.
Instrument and data management made simple
Our Discovery software gives you access to hardware State-of-Health; data viewing; data streaming and back fill capabilities; advanced data analysis tools; GNSS location; instrument response and calibration values.
Find out more about Discovery
Find out more about Discovery
Designed to withstand the harshest of environments
Encased in an environmentally sealed, hard anodised aluminum casing and available with or without a multi-touch sensitive, 2.4 inch, full colour LCD display. Certimus has an internal thermometer and a humidity sensor to alert you to any moisture ingress.
Field deployments made easy
For direct burial installations, data can be recorded to an SD card in the Surface Storage Module for easy retrieval without disturbance.
For remote sites, the Portable Power Pack provides a compact, re-chargeable battery suitable for direct connection to solar panels.
For remote sites, the Portable Power Pack provides a compact, re-chargeable battery suitable for direct connection to solar panels.
Ready to go whenever you are
The rugged Certimus back-pack will protect Certimus during field deployments with additional space for accessories and documentation.
Specifications
Smart seismic station
Configuration / Topology
Triaxial orthogonal (ZNE)
Maximum frequency response bandwidth
120 s (0.0083 Hz) to 100 Hz
User selectable high-pass frequency corner from 120 s to 1 s.
User selectable high-pass frequency corner from 120 s to 1 s.
Output sensitivity
1000 V/ms-¹ or 2000 V/ms-¹ (User-selectable via instrument webpage)
Sensor dynamic range
149 dB
Self-noise
173 dB at 10 seconds
ADC converter
Delta-sigma
Output format
32-bit
Dynamic range
>136.5 dB at 100 samples per second
Data recording formats
miniSEED (metadata stored in Station XML and dataless SEED formats)
Flash memory and storage
Dual-redundant 64 GB microSD cards (1 fixed, 1 hot-swappable)
Communication technologies
Ethernet (10/100/1000BASE-T) with Power over Ethernet (PoE), Wi-Fi
Want to know more?
Complete our enquiry form and one of our team will be in touch.