Firmware for legacy 5TDs

Legacy 5TDs running a firmware version v.0xx should upgrade to this last firmware version. Read more...

Firmware for legacy 6TDs

Legacy 6TDs that are operating on a firmware version lower than v.200 should use these instructions to upgrade to the…

Firmware recovery for Mk2 DM24 digitisers

This article will help you diagnose problems with a DM24 digitiser, where you are not receiving any data streams, the…

Firmware for Mk2 DM24 borehole digitisers

Güralp borehole digitizers manufactured between 2000 and 2005 are of this type. Firmware for these modules has a version number…

Firmware for Mk2 DM24 surface digitisers

Güralp digitizers manufactured between 2000 and 2005 are of this type. Firmware for these modules has a version number above…

Firmware for Mk2 DM24 borehole digitisers

Firmware for Mk2 DM24 borehole digitisers firmware-for-the-dm24-mk2-borehole
Firmware for Mk2 DM24 borehole digitisers firmware-for-the-dm24-mk2-borehole

Firmware for Mk2 DM24 surface digitisers

Firmware for Mk2 DM24 surface digitisers firmware-for-the-dm24-mk2
Firmware for Mk2 DM24 surface digitisers firmware-for-the-dm24-mk2

Firmware for the older 6TDs (those currently running a firmware version lower than v.200)

Firmware for the older 6TDs (those currently running a firmware version lower than v.200) firmware-for-older-6tds
Firmware for the older 6TDs (those currently running a firmware version lower than v.200) firmware-for-older-6tds

Firmware for the SAM and CRM

Firmware for the SAM and CRM firmware-for-the-sam-and-crm
Firmware for the SAM and CRM firmware-for-the-sam-and-crm

Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory)

Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory) dcm2platinum-reflash
Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory) dcm2platinum-reflash

Upgrading DCM units with legacy firmware to Platinum firmware

Upgrading DCM units with legacy firmware to Platinum firmware dcm2platinum
Upgrading DCM units with legacy firmware to Platinum firmware dcm2platinum

 

Firmware for older 5TDs

Firmware for older 5TDs firmware-for-older-5tds
Firmware for older 5TDs firmware-for-older-5tds

 

Address:
Güralp Systems Ltd.
3 Midas House, Calleva Park
Aldermaston, Reading
RG7 8EA
United Kingdom

Tel: +44 1189 819056
Email: sales@guralp.com
Copyright © 2024 Güralp Systems Ltd. All Rights Reserved.
This website uses cookies. You may decline the use of cookies for this website but it may impact your user experience. Click on the 'More information' button to find out more about the cookies we use.
Accept cookies Decline cookies
More information