FIRMWARE AND SOFTWARE
Legacy NAM/NAM64 Platinum firmware recovery (for units with corrupt memory) Open
Legacy NAM/NAM64 Platinum firmware recovery (for units with corrupt memory) nam-nam64-platinum-firmware-recovery
| Legacy NAM/NAM64 Platinum firmware recovery (for units with corrupt memory) | nam-nam64-platinum-firmware-recovery |
Firmware recovery for Mk2 DM24s Open
Firmware recovery for Mk2 DM24s troubleshooting-dm24-mk2-digitizers
| Firmware recovery for Mk2 DM24s | troubleshooting-dm24-mk2-digitizers |
Firmware for older 6TDs Open
Firmware for older 6TDs Firmware-for-older-6TDs
| Firmware for older 6TDs | Firmware-for-older-6TDs |
Firmware for older 5TDs Open
Firmware for older 5TDs firmware-for-older-5tds
| Firmware for older 5TDs | firmware-for-older-5tds |
Upgrading DCM units with legacy firmware to Platinum firmware Open
Upgrading DCM units with legacy firmware to Platinum firmware dcm2platinum
| Upgrading DCM units with legacy firmware to Platinum firmware | dcm2platinum |
Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory) Open
Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory) dcm2platinum-reflash
| Re-flashing a DCM to install Platinum Firmware (for units with corrupt memory) | dcm2platinum-reflash |
Firmware for the SAM and CRM Open
Firmware for the SAM and CRM firmware-for-the-sam-and-crm
| Firmware for the SAM and CRM | firmware-for-the-sam-and-crm |
Firmware for the older 6TDs (those currently running a firmware version lower than v.200) Open
Firmware for the older 6TDs (those currently running a firmware version lower than v.200) firmware-for-older-6tds
| Firmware for the older 6TDs (those currently running a firmware version lower than v.200) | firmware-for-older-6tds |
Firmware for Mk2 DM24 surface digitisers Open
Güralp digitizers manufactured between 2000 and 2005 are of this type. Firmware for these modules has a version number above…
Firmware for Mk2 DM24 borehole digitisers Open
Güralp borehole digitizers manufactured between 2000 and 2005 are of this type. Firmware for these modules has a version number…
Legacy NAM/NAM64 Platinum firmware recovery Open
Procedure to recover units with corrupt memory. This procedure applies to legacy NAMs and NAM64s (double- and triple-height rack-mounting units)…
Firmware recovery for Mk2 DM24 digitisers Open
This article will help you diagnose problems with a DM24 digitiser, where you are not receiving any data streams, the…
Firmware for legacy 6TDs Open
Legacy 6TDs that are operating on a firmware version lower than v.200 should use these instructions to upgrade to the…
Firmware for legacy 5TDs Open
Legacy 5TDs running a firmware version v.0xx should upgrade to this last firmware version. Read more...